ISO9001 Certificate PE Heat Shrink Sleeves
-
$10.00≥500 Set/Sets
- Min. Order:
- 500 Set/Sets
- Min. Order:
- 500 Set/Sets
- Transportation:
- Ocean, Air
- Port:
- Qingdao, Shanghai, Shenzhen
Your message must be between 20 to 2000 characters
Contact Now| Place of Origin: | China |
|---|---|
| Productivity: | 500 PCS/Day |
| Supply Ability: | 5000 rolls/Month |
| Payment Type: | L/C,T/T |
| Incoterm: | FOB,CIF |
| Certificate: | ISO |
| HS Code: | 3920 |
| Transportation: | Ocean,Air |
| Port: | Qingdao,Shanghai,Shenzhen |
Heat shrink wrap sleeves
The heat shrink wrap sleeves offer a reliable solution for protecting pipelines, cables, and other equipment from corrosion and damage. heat shrink wrap sleeves, such as Forever HST, offer a comprehensive solution for corrosion protection.
The corrosion protection provided by heat shrink wrap sleeves is exceptional. The sleeves are designed to create a tight seal around the surface, preventing moisture and corrosive substances from reaching the underlying material. This helps to extend the lifespan of the protected equipment and reduce maintenance costs.
The superior resistance to Cathodic Disbondment is another key feature of heat shrink wrap sleeves. Cathodic disbondment occurs when there is a breakdown in the protective coating system, leading to corrosion and damage. The high-performance adhesive used in heat shrink wrap sleeves effectively resists this disbondment, ensuring long-term corrosion protection.
Additionally, heat shrink wrap sleeves offer excellent durability against abrasion and chemical attack. The cross-linked backing material provides superior resistance to mechanical damage, such as scratches and impacts. It also withstands exposure to chemicals, ensuring that the sleeves remain intact and continue to provide effective protection.
The ease of operation and low preheating temperature (60 ℃) make heat shrink wrap sleeves convenient to use. The sleeves can be easily wrapped around the equipment and secured with the separate closure. The low preheating temperature reduces the risk of heat damage to the protected material.
|
|
|
Test standard |
Unit |
3PE 65 |
|
Adhesive |
Softening point |
ASTM E28 |
℃(℉) |
95 |
|
|
Lap shear @23℃ |
EN12068 |
N/cm2 |
450 |
|
|
Lap shear @23℃ |
EN12068 |
N/cm2 |
25 |
|
Backing |
Specific gravity |
ASTM D792 |
g/cm3 |
95 |
|
|
Tensile strength |
ASTM D638 |
MPa (psl) |
24 |
|
|
Elongation |
ASTM D638 |
% |
425 |
|
|
Hardness |
ASTM D2240 |
Shore D |
55 |
|
|
Abrasion resistance |
ASTM D 1044 |
Mg |
35 |
|
|
Volume resistance |
ASTM D257 |
Ohm-cm |
1017 |
|
|
Dielectricvoltage breakdown |
ASTM D149 |
Kv/mm |
27 |
|
Sleeves |
Impact |
EN12068 |
J |
>8 |
|
|
Indentation |
EN12068 |
mm |
0.1 |
|
|
Peel adhesion |
ASTM D1000 |
N/cm |
120 |
|
|
Peel adhesion |
EN12068 |
N/cm |
>140 |
|
|
Cathodic disbondment |
ASTM G8 |
Mm rad |
3 |
|
|
Water absorption |
ASTM D 570 |
% |
0.05 |
|
|
Low Temp.flexbility |
ASTM D2671-C |
℃(℉) |
>-32(-26) |
|
|
Fully recovered T thickness |
|
Mm(mil) |
1.9(77) |
|
|
Fully recovered L thickness |
|
Mm(mil) |
2.4(96) |
|
|
Fully recovered S thickness |
|
Mm(mil) |
3.0(121) |
In a nutshell,Heat Shrinkable Sleeves covered
3LPE Heat Shrink Sleeves，2PE Heat Shrink Tape，3LPP Wrap Around Sleeve
HDD Heat Shrink Wrap Sleeves,Shrinkable Tape Closure Patch
Related Keywords
