HSS Hot Melt Sticks and Filler
-
$8.00≥500 Kilogram
- Min. Order:
- 500 Kilogram
- Min. Order:
- 500 Kilogram
- Transportation:
- Ocean, Land
- Port:
- Shenzhen, Shanghai , Qingdao
Your message must be between 20 to 2000 characters
Contact Now| Place of Origin: | China |
|---|---|
| Productivity: | 500 PCS/Day |
| Supply Ability: | 5000 rolls/Month |
| Payment Type: | L/C,T/T |
| Incoterm: | FOB,CIF,EXW |
| Certificate: | ISO |
| HS Code: | 3920 |
| Transportation: | Ocean,Land |
| Port: | Shenzhen,Shanghai ,Qingdao |
HSS repair Melt Sticks and Filler
HSS hot Melt Sticks and Filler
HSS hot Melt Sticks and Filler are heat-activated adhesives supplied as a rod for ease of application.
They are ideal for small coating repairs ranging from superficial damage to holidays and cracks up to 10mm x 10mm. HSS hot Melt Sticks and Filler may also be used as a filler material below Coating Repair Patches.
Mastic Filler
Mastic Filler is used to fill larger voids and deep crevices in damaged coatings prior to the application of Forever’s Repair Patches.
Note: For damage greater than 150mm x 150mm, a new sleeve is recommended.
HSS hot Melt Sticks and Filler is designed specifically for sealing and protection of damaged pipeline coatings up to 200mm x 200mm in size.
The patch can be installed quickly with no special tools required. The installed patch provides a barrier to moisture and corrosion and is resistant to abrasion and shear forces during pipeline installation and while in-service.
|
Softening point |
ASTM E28 |
℃(℉) |
95 |
|
Lap shear @23℃ |
EN12068 |
N/cm2 |
450 |
|
Lap shear @23℃ |
EN12068 |
N/cm2 |
25 |
|
Specific gravity |
ASTM D792 |
g/cm3 |
95 |
|
Tensile strength |
ASTM D638 |
MPa (psl) |
24 |
|
Elongation |
ASTM D638 |
% |
425 |
|
Hardness |
ASTM D2240 |
Shore D |
55 |
|
Abrasion resistance |
ASTM D 1044 |
Mg |
35 |
|
Volume resistance |
ASTM D257 |
Ohm-cm |
1017 |
|
Dielectricvoltage breakdown |
ASTM D149 |
Kv/mm |
27 |
|
Impact |
EN12068 |
J |
>8 |
|
Indentation |
EN12068 |
mm |
0.1 |
|
Peel adhesion |
ASTM D1000 |
N/cm |
120 |
|
Peel adhesion |
EN12068 |
N/cm |
>140 |
|
Cathodic disbondment |
ASTM G8 |
Mm rad |
3 |
|
Water absorption |
ASTM D 570 |
% |
0.05 |
|
Low Temp.flexbility |
ASTM D2671-C |
℃(℉) |
>-32(-26) |
Sichuan Forever main products has heat Shrinkable Sleeves, Pipe Repair Material,Liquid Epoxy Coatings,Visco-Elastic Coating Materials,Cold-Applied Polymeric Tape and other Wrapping materials application tooling.
Related Keywords
