Hydrogen Fuel Cell Proton Exchange Membrane N3015

Hydrogen Fuel Cell Proton Exchange Membrane N3015

$219.00

≥100 Square Meter

Min. Order:: 100 Square Meter

Min. Order:: 100 Square Meter

Transportation:: Ocean, Land, Air, Express, Express

Port:: shanghai , shenzhen, guangzhou

Quantity:

Your message must be between 20 to 2000 characters

Contact Now

Basic Info

Place of Origin:	China
Payment Type:	L/C,T/T,D/P,D/A,Paypal,Money Gram,Western Union,D/A
Incoterm:	FOB,CFR,CIF,EXW,FAS,FCA,CPT,CIP,DEQ,DDP,DDU,Express Delivery,DAF,DES
Certificate:	MSDS ISO
HS Code:	3921909001
Transportation:	Ocean,Land,Air,Express,Express
Port:	shanghai ,shenzhen,guangzhou

Product Description

Hydrogen Fuel Cell Ion Membrane N3015

perfluorinated ion membrane n-30x PTFE reinforced series is a composite perfluorosulfonic acid h-type proton exchange membrane produced by corona company by steel strip fluidization method combined with ePTFE microporous reinforced material.

Perfluoroionic membrane n-30x PTFE reinforced series is a composite perfluorosulfonic acid h-type proton exchange membrane produced by steel strip fluidization method combined with PTFE microporous reinforced material. N - 30 x PTFE reinforced proton exchange membrane with cationic one way through the properties of the used PTFE microporous membrane as a skeleton with high-performance perfluorinated sulfonic acid ion exchange resin, adjust the most suitable molecular weight and ion exchange capacity, with a thickness of thin, low strength, high electrical conductivity, swelling, size stability, good durability, etc. N-30x PTFE enhanced proton exchange membrane is particularly suitable for use in fuel cells.

Specification:

Type	Thickness(μm)	Weight(g/m2)
N-3010	10	19
N-3015	15	29
N-211	25	50
N-212	51	102

Mechanical properties

	N-3010		N-3015		N-211/212
Physical Properties	Technical Index					Test Method
Tensile Test (23°C, 50% RH)	MD	TD	MD	TD	/
Tensile Strength(MPa)	45	38	40	35	30	ASTM D 882
Tensile Modulu(MPa)	480	400	400	350	400	ASTM D 882
Elongation at break(%)	175	150	190	170	150/180	ASTM D 882
Specific Gravity	1.97		1.97		1.98	—
Other properties	Technical Index					Test Method
Conductivity(S/cm)	0.095		0.134		0.100	GB/T 20042.3-2009
Hydrogen Crossover(ml/min·cm2)	＜0.010		＜0.010		＜0.015/0.010	GB/T 20042.3-2009
Hydrogen Crossover Current(mA/cm2)	＜2.0		＜2.0		/

Hydrolytic Properties	Index Parameters							Test Method
Water Content(%)	10.0±3.0			10.0±3.0		5.0±3.0		ASTM D570
Water Uptake(%)	50.0±5.0			50.0±5.0		50.0±5.0		ASTM D570
Thickness Change from 50% RH, 23°C to water soaked,23°C	10			15		10		ASTM D756
Thickness Change from 50% RH, 23°C to water soaked,100°C	30			40		30		ASTM D756
	MD	TD	MD		TD		/
Linear expansion from 50% RH, 23°C to water soaked,23°C	3	4	3		5		4	ASTM D756
Linear expansion from 50% RH, 23°C to water soaked,100°C	5	2	10		5		20	ASTM D756

1. Measurements taken with membrane conditioned to 23°C, 50% RH.

2.Conductivity measurements a 23 °C, 100% RH.

3.A base titration procedure measures the equivalents of sulfonic acid in the polymer, and uses the measurement to calculate the acid capacity or equivalent weight of the membrane.
4.Water content of membrane conditioned to 23 °C and 50% RH (dry weight basis).

5.Water uptake from dry membrane to conditioned in water at 100 °C for 1 hour (dry weight basis)

Application:

Fuel cell

Proton Ion Exchange Membrane

Packing:

coil

Standard volume: 0.2m*100m;
Special specification: >0.2m width, arbitrary length. (for special specifications, the order quantity should be over 100 square meters and the width should not be greater than 0.6m)
Film dimensions are based on dry film products prior to cutting, at 23°C and 50% relative humidity. The humidity and temperature of the air will affect its size. The products that need to be pretreated by our company are guaranteed to be of positive tolerance, and the products after preprocessing are all sheet materials.
Film packaging, the use of the volume, less than the volume of no core, a larger number of containing the core. The dry film all USES the hard protective film to make the bottom protection, the outer packing USES the plastic bucket or the hard carton packing. Please contact the sales staff for special size and packing.

Recovery and treatment:
As the product will volatilize toxic and harmful substances during incineration, it can be disposed by landfill. Only if the incinerator is capable of removing hydrogen fluoride and other acidic combustion products. The disposal of this product must comply with the relevant local laws and regulations.
Our company provides paid recycling service for perfluorinated ion membrane waste. For details, please contact our sales staff.

Send your message to this supplier

* From:
* To:

Mr. GUS ZHANG
* Messages:

Enter between 20 to 4,000 characters.

Related Keywords

Hydrogen Fuel Cell Ion Membrane , Hydrogen Fuel Cell Proton Membrane , Hydrogen Fuel Cell Proton Exchange Membrane